2 bottles of PureWax Waterless Wash / Detailer (474ml.) 1 FREE bottle of PureWax Acid Rain and Watermark Remover (250ml.)
PureWax Watermark Remover
PureWax Watermark Remover miraculously removes stubborn watermarks caused by acid rain and other chemicals. It cleans car parts - glass, stainless, or aluminum, Fast and Easy. No need for expensive glass detailing, you can Do-It-Yourself. Not for use on painted surfaces.
STRICTLY USED FOR EXTERNAL GLASS ONLY
Clean the vehicle's glass surface where the product will be applied to. Make sure that the glass surface is dry and cool to the touch.
Using a clean sponge or a clean towel, moisten the sponge/towel with a few drops of the PureWax Acid Rain and Watermark Remover (Wearing of rubber gloves is highly recommended to avoid contact with skin)
On a small portion of the glass, test the solution by applying in small circular motions (light-medium pressure applied)
Rinse thoroughly with water after 5-10 secs of application, make sure that all residue is removed from the glass surface (This step is very important)
Wipe dry with a clean cloth, inspect if there are chemical reactions with the glass. See if watermarks are removed. If not, repeat the process.
HOW TO USE
Step 1: Spray a mist of the product directly onto a section or panel
- Shake well before use
- Make sure to wash your vehicle in a shaded area and that the vehicle is cool to the touch.
Step 2: Using a Microfibre Cloth, wipe the LIGHTLY in one direction (NOT circular) to remove dirt and excess product until panel is clean.
- We recommend using the Purewax High Grade Microfiber towel
- Pay attention to the cleanliness of the Microfibre cloth; when one side becomes soiled, switch to the other side.
Step 3: Buff the area dry with a new clean microfiber towel to reveal a high gloss shine.
- Always use two different Microfibre towels, i.e. one for wiping the dirt and second only for buffing.
BEFORE & AFTER